Commercial building solar panels in Redhill
For a landlord in Redhill, a roof array is increasingly a question about the EPC rating as much as the electricity bill. The survey starts with the membrane and the deck: how many years the covering has left, what the roof can carry in ballast, and where plant and its shade rule panels out.
916 kWh per kWp a year at this latitude, so a 210 kWp array models at about 192,000 kWh. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
Book a roof survey in RedhillIllustrative layout for a flat commercial roof of this size, with plant, shade and access kept clear. Your own figures come from the roof survey.
- 32,525
- people in the Redhill built-up area (ONS Census 2021)
- 840
- office properties on the rating list in Reigate and Banstead (VOA, March 2025)
- 1,030
- retail properties, 20 of them large-format (VOA, March 2025)
- 1
- named commercial rooftop scheme on the planning record nearby (REPD, Q1 2026)
Solar for offices and retail across Surrey
How much sun a Redhill roof gets
Modelled irradiation here is 1,175 kWh per square metre a year on a low-tilt array, which works out at 916 kWh for every kWp installed (EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss). That is around 3 percent above the mean across the towns we cover.
The rating list for Reigate and Banstead
The Valuation Office Agency's rating list puts 840 office and 1,030 retail properties in Reigate and Banstead, covering about 226,000 and 154,000 square metres of floorspace respectively. By office stock the district sits below the median of the 318 districts in England and Wales; by retail stock it sits below the median of the 318 districts in England and Wales.
20 of those retail properties are superstores, large food stores, large shops or retail warehouses, together about 41,000 square metres. Single storey boxes of that size are where most commercial rooftop solar actually gets built, because the roof is big, flat or shallow, and uninterrupted.
The same list carries 170 hotel, leisure and assembly properties in the district. Leisure centres and hotels run seven days a week, which puts weekend generation to use that an office would export.
Source: Valuation Office Agency, Non-domestic rating: business floorspace, 31 March 2025 (published December 2025), counts and floorspace by special category code and local authority district, England and Wales.
Commercial rooftop solar already planned near Redhill
The Renewable Energy Planning Database records one roof-mounted scheme on public sector buildings in this postcode district. These are other organisations' projects, listed from the public record, not ours.
| Scheme | Applicant | Type | Capacity | Status |
|---|---|---|---|---|
| East Surrey Hospital, Canada Avenue | Carbon3 | civic | 2.1 MW | Awaiting Construction |
The built-up area holds about 32,525 people, so the stock here runs to high street premises, a supermarket or two and the odd hotel (ONS Census 2021 built-up areas).
Surveys run across RH postcodes, RH1 outward.
Redhill ranks 1 of 10 towns we cover in Surrey on modelled yield, against a national mean of 886 kWh per kWp. The county runs from 900 to 916, a spread of 16 kWh per kWp. Within Surrey that difference is small enough to ignore: where the building sits is not what decides this scheme, your consumption pattern is.
Grid connection through UK Power Networks
UK Power Networks operates the distribution network across Surrey, so the export application goes to them. Anything larger than 3.68 kW per phase falls under G99, which means an application before commissioning rather than a notification afterwards. A constrained network is not the end of a scheme. Capping export costs little when the building already absorbs most of what the roof produces.
Across Surrey the planning database records 74 solar schemes totalling 182 MW, of which 6 are operational (REPD Q1 2026).
Send us the postcode
Tell us where the building is, roughly how big the roof is, and whether you own it or lease it. We come back with what it can carry, what it would generate against your consumption, and the three ways to pay for it.
Lenzie Consulting Ltd arranges the survey and passes your details to our MCS-certified installation partner so they can quote.
Questions about solar in Redhill
- Is there enough sun in Redhill for a commercial roof array?
- Modelled at 916 kWh per kWp a year for a low-tilt array at this latitude, a 210 kWp system comes out at roughly 192,000 kWh a year before shading. It needs about 1,390 m² of flat roof once the edge strip, plant and walkways are kept clear. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
- Is planning permission needed for panels on a Redhill office or shop?
- Usually not a full application. In England, panels on the roof of a non-domestic building are permitted development under Class J of Part 14 of the General Permitted Development Order, with no capacity cap since December 2023. Above 50 kW, which covers most commercial arrays, you must first apply to Reigate and Banstead for a determination on prior approval of the design and appearance, in particular glare on neighbouring land. On a flat roof panels may stand no more than 1 metre above the roof and must sit at least 1 metre from its edge, and listed buildings and scheduled monuments are excluded. See our planning permission guide for the detail.
- Will rooftop solar improve the EPC rating of a let building in Redhill?
- It can. A non-domestic EPC is an asset rating, and on-site generation counts in the calculation, so an array usually lifts the score. Let property in England and Wales must be EPC E or better today. The government's interim response of 18 June 2026 proposes EPC B, where cost effective, from 2031 for let buildings over 1,000 m², and drops the EPC C step once planned for 2027. How far solar moves a particular building depends on its fabric and services, which is why the EPC assessor models it before anything is fitted.
- Does the grid around Redhill have capacity for export?
- UK Power Networks is the distribution network operator for Surrey. Arrays above 3.68 kW per phase connect under G99, and the application sets the export limit. It is part of the design work we arrange.